Attach this in-line switch to any of our twisted pair wires, any of our parallel cords, any of our overbraid cords and 18 gauge pulley cords to allow turning your lamp, fan, or small appliance on and off at a convenient distance from your chair or bedside. It comes in gold and white. Black has been discontinued.
This switch fits cords up to 1/4" in diameter. Please note that none of our switches fit our 16 or 14 gauge pulley cord.
This switch comes with two terminals in the middle where you attach the hot wire. It also comes with a terminal pair on either side. These are included for a European-style wiring, but should be removed if you are not doing that kind of wiring. When these are removed (using a small screwdriver to pry them up), you can run the neutral and, if you have one, ground wires along the sides without cutting them. In the picture, the black switch has the extra terminals still in it and the gold one has them removed and they are sitting beside it.
To open this switch to wire it, just pry it open. There are no screws holding it closed.
This product is one switch only. The wire is not included, but you can have us install the switch for you if you order a cord set (wire with plug attached) or pendant (wire with socket and plug).
Please see How to Wire a Cord Switch for instructions on how to install this switch.
UL: UL-Recognized, 125V/2A-250V/1A
Made in: Italy
Dimensions: 2 1/2" x 1" x 1"